Edirol PC-80 - Uninstalling the PC-80 Driver (Macintosh); Uninstalling the Driver on Macintosh

112
PC-80 driver settings
On the Macintosh, you can use PC-80_Uninstaller (located in the Driver folder of the CD-ROM)
to uninstall the driver.
Refer to Readme_E.txt on the CD-ROM along with the explanation that follows.
1
Disconnect all USB cables from your Macintosh (with the exception of those
for a USB keyboard and USB mouse), and start up the Macintosh.
2
Close the PC-80 software synthesizer.
1. Hold down the Control key and click the PC-80 Software Synthesizer icon shown in
the Dock.
2. From the menu that appears, choose Exit .
3
Place the PC-80 software CD-ROM in the CD-ROM drive of your Macintosh.
4
In the Driver folder of the CD-ROM, double-click PC80_Uninstaller .
5
The message “This uninstalls EDIROL PC-80 Driver from this Macintosh.” will appear.
Click [Uninstall] .
* If any other message appears, proceed as directed by that message.
6
The display will indicate “Are you sure to uninstall the driver?”
Click [OK] .
7
The “Authenticate” dialog box will appear.
Enter the password, and press [OK] .
8
The display will indicate “Uninstallation is completed.”
Click [Restart] to restart your Macintosh.
Macintosh users
PC-80_e.book 112 ページ ２００５年１１月１０日 木曜日 午前１１時３４分