Edirol PC-80 - System Settings - F8 Clock Tempo; Setting F8 Clock Default Tempo

91
System settings for the PC-80
fig.util*
1
Simultaneously press the MIDI CH button and PGM CHANGE button,
and hold them down for a few moments.
The PC-80’s display will indicate “UTL,” and you will be in Utility mode.
fig.sy0
2
Press the [SYSTEM] key on the keyboard.
“SY0” appears (blinking) in the display.
3
Use the VALUE encoder or the [1] key of the keyboard to choose “ SY1 .”
fig.enter
4
Press the ENTER button.
* If you press any other button without pressing the ENTER button, the setting will be
cancelled.
5
Use the VALUE encoder or press one of the [0] – [9] keys of the keyboard to set the F8 Clock
Default Tempo to a value in the 20–250 range.
The display will indicate the value you specified.
6
Press the ENTER button.
F8 CLOCK DEFAULT TEMPO
PC-80_e.book 91 ページ ２００５年１１月１０日 木曜日 午前１１時３４分