Edirol PC-80 - Recording MIDI Performance in SONAR LE; Setting MIDI Tracks for Recording; Starting and Stopping MIDI Recording; Playing Back Recorded MIDI Data

52
Recording your performance in sequencer software (SONAR LE)
If you put a track in record-ready mode, you’ll be able to record data on that
track. A track that is in record-ready mode will record data from the device
that’s assigned as the input for that track. If a track is in record-ready mode,
the record-ready button of the track will light red, and the clip indicator area
will turn to a reddish color.
1
Select the MIDI track on which you want to record.
2
In the Track window, click the Record button
of the MIDI track you want to record, placing
the track in record-ready mode.
* The record-ready button of a track will turn red when
the track is in record-ready mode.
1
Make sure that the track to be recorded is in record-ready mode.
2
In the transport toolbar, click the record button .
3
Play the PC-80 keyboard.
The clip indicator area will show a clip that contains the newly recorded data.
4
In the transport toolbar, click the stop button .
Recording will stop.
Now let’s play back the data you recorded.
■ Starting and stopping playback
Recording a MIDI performance from the PC-80
Putting a track in record-ready mode
Starting and stopping recording
Playing back the recorded performance
When you want to Do this
Start playback
• Press the Space key
• Click
• Execute the Transport | Play command
Stop
• Press the Space key
• Click
• Execute the Transport | Stop command
Rewind to the beginning of the
project
• Press the “w” key
• Click
• Execute the Transport | Rewind command
Click
Transport toolbar
PC-80_e.book 52 ページ ２００５年１１月１０日 木曜日 午前１１時３４分