Edirol PC-80 - Using PC-80 as MIDI Controller - Mono Mode Message; Transmitting Mono Mode On Message

72
Using the PC-80 as a MIDI controller keyboard
■ Transmitting a Mono Mode On message
Here’s how to transmit a Mono Mode On message to switch your sound module to Mono mode.
Mono mode allows only single notes to be played at a time.
fig.mono-1_80
fig.util*
1
Simultaneously hold down the MIDI CH button and PGM CHANGE
button for a few moments.
The display will indicate “UTL ” and you will be in Utility mode.
fig.mno
2
Press the keyboard key marked [MONO] .
The indication “MNO ” starts blinking in the display.
fig.enter
3
Press the ENTER button.
* If you press a different button without pressing the ENTER button , the setting will be
cancelled.
The Mono Mode On message has been sent.
213
PC-80_e.book 72 ページ ２００５年１１月１０日 木曜日 午前１１時３４分