Edirol PC-80 - Using PC-80 as MIDI Controller - Portamento On Message; Transmitting Portamento On Message

73
Using the PC-80 as a MIDI controller keyboard
■ Transmitting a Portamento On message
Here’s how to transmit a Portamento On message to enable Portamento on your sound
module so that the pitch will change smoothly between each note you play.
fig.portaon-1_80
fig.util*
1
Simultaneously hold down the MIDI CH button and PGM CHANGE
button for a few moments.
The display will indicate “UTL ” and you will be in Utility mode.
fig.pon
2
Press the keyboard key marked [PORTA ON] .
The indication “PON ” starts blinking in the display.
fig.enter
3
Press the ENTER button.
* If you press a different button without pressing the ENTER button , the setting will be
cancelled.
The Portamento On message has been sent.
213
PC-80_e.book 73 ページ ２００５年１１月１０日 木曜日 午前１１時３４分