Edirol PC-80 - Using PC-80 as MIDI Controller - Continuing Playback; Transmitting a MIDI Continue Message

70
Using the PC-80 as a MIDI controller keyboard
■ Continuing playback from the current location
—Transmitting a Continue message
Here’s how to transmit a Continue message (FBh) to resume playback from the current
location.
fig.start-1_80
fig.util*
1
Simultaneously hold down the MIDI CH button and PGM CHANGE
button for a few moments.
The display will indicate “UTL” and you will be in Utility mode.
fig.cont
2
Press the keyboard key marked [CONT] .
The indication “CNT” starts blinking in the display.
fig.enter
3
Press the ENTER button .
*If you press a different button without pressing the ENTER button , the setting will be
cancelled.
The Continue message has been sent.
132
PC-80_e.book 70 ページ ２００５年１１月１０日 木曜日 午前１１時３４分