Solution-8 Operators Manual Page 13
MA800O3C.DOC
El
ectronics Design & Manufacturing
Day Alarm
+
7
+
or
99997
+
Day alarm is a feature capable of indicating that one or a number of zones are currently
opened (the specific zones will need to be assigned by your installer).
Let us assume that your installer has programmed the front door for Day Alarm, an
indication will be given every time the front door is opened.
This indicator could be your console buzzer or any other external warning device of
your choice.
It should be noted that this feature only works while the system is in the disarmed state
and will not give any indication when the system is armed in either the AWAY or
STAY modes.
As there may be a need from time to time to disable this feature, you have the ability to
do so via the console. Simply turn the day alarm on and of as is required.
To turn Day Alarm on key in your MASTER code or special function code 9999
followed by the number '7' then the AWAY button. Three beeps will be heard to
confirm a valid activation of day alarm mode.
Please note that there is no visual display on the console informing you that Day Alarm
has been turned on.
To verify correct operation violate one of the Day Alarm zones and ensure that your
indicator is working appropriately.
To turn day alarm off key in the MASTER code or special function code 9999 followed
by the number '7' then the AWAY button. Two beeps will be heard to indicate that day
alarm mode has been disabled.
To Next Page
Loading...