Page 26 Solution-8 Operators Manual
Electronics Design & Manufacturing
M
A800O3C.DOC
Warranty Statement
Electronics Design & Manufacturing warrants this product to be free from defects in
material and workmanship for a period of three years from the date of manufacture as
indicated by the date stamp and/or the serial number on the product. Defective units
returned by the purchaser at their own expense during this period will be repaired or
replaced at the option of the manufacturer. The repair or replacement will be free of
charge provided that the damage was not due to causes beyond the control of Electronics
Design & Manufacturing, such as lightning damage, excessive voltage, mechanical
shock or d
amage arising out of abuse, alteration or improper application of the equipment.
Quality Policy
AS 3901 Clause 4.1.1 Refer to Procedure No 1
The operations of Electronics Design & Manufacturing include design, development and
manufacturing of electronic equipment.
Electronics Design & Manufacturing recognises that it is the responsibility of suppliers
and contractors to meet their contractual obligations and carry out works which comply
fully with the relevant specifications, drawings and contract documents.
It further recognises that the diligent operation of a Quality Management System leads
to efficient and effective execution of the works with a minimum of errors and rework.
Electronics Design & Manufacturing and its Employees are committed to the
implementation of this Quality Management System in accordance with Australian
standard AS3901-1987, European standard ISO9001-1987 and New Zealand standard
NZS9001-1990 implementing quality systems for design, development and production
to the mutual benefit of the customers and Electronics Design & Manufacturing.
Meinrad Formosa
Managing Director
To Next Page
Loading...