Solution-8 Operators Manual Page 19
MA800O3C.DOC
El
ectronics Design & Manufacturing
When interrogating the panel, if 1 beep is heard between the bursts of siren tone then a
24 Hour zone alarm has occurred. If 2 beeps are heard then a burglary zone alarm has
occurred. If more than 1 zone has alarmed, ie. a burglary and a 24 Hour zone, then only
the 24 Hour zone alarm will be indicated.
If upload/download is programmed, then it is not possible to interrogate the panel as the
upload/download feature will take precedence.
NOTE:
If an alarm is triggered you may stop the dialling sequence at any time by simply
entering your code followed by the AWAY button.
Pager Dialling Formats
Pager reporting formats have been introduced so that alarm and system information can
be transferred to a pocket pager allowing you to receive information from your alarm
system at any time.
Two transmission formats are available, the first being Basic Pager Format which is the
simplest to interpret. The client identification number followed by zone information and
system status information.
See the example below.
The second format is the Advanced Pager Format, the information displayed is largely
dependent on how the system has been programmed and should be explained by you
installer.
Both formats transmit 3 digits for the client identification number making it possible to
differentiate between 999 different systems when a number of alarm systems are
reporting to the one pager number.
To Next Page
Loading...