© Edwards Limited 2008. All rights reserved. Page 5
Edwards and the Edwards logo are trademarks of Edwards Limited.
Introduction
S900-01-880 Issue C
Figure 2 - General arrangement of the V (vertical) booster
A. Standard direct drive pump
B. Direct drive pump with bypass valve
1. Oil filler plug (gear end)
2. Inlet
3. Oil filler plug (drive end)
4. Motor (IEC frame shown)
5. Direction of rotation arrow
6. Oil-level sight-glass (drive end)
7. Outlet
8. Oil drain plug (drive end)
9. Oil drain plug (gear end)
10.Oil-level sight-glass (gear end)
11.Bypass valve
To Next Page
Loading...
