Declaration of Incorporation
We, Edwards Limited,
Crawley Business Quarter,
Manor Royal,
Crawley,
West Sussex, RH10 9LW, UK
declare under our sole responsibility, as manufacturer and person within the EU authorised
to assemble the technical file, that the machine(s)
CDX1000, 30 kW, 50 Hz, Flameproof with Integral Flame Arrestors A708-01-985
CDX1000, 40 h.p., 60 Hz, Flameproof with Integral Flame Arrestors A708-11-985
CDX1000, 30 kW, 50 Hz, Flameproof (without Flame Arrestors) A708-02-985
CDX1000, 40 h.p., 60 Hz, Flameproof (without Flame Arrestors) A708-12-985
IDX1000, 22 kW, 50 Hz, Safe Area A708-03-985
IDX1000, 30 h.p., 60 Hz, Safe Area A708-13-985
IDX1000, 30 kW, 50 Hz, Safe Area, Extended Performance A708-04-985
IDX1000, 40 h.p., 60 Hz, Safe Area, Extended Performance A708-14-985
IDX1300, 30 kW, DIN, Safe Area A709-04-985
IDX1300, 40 h.p., ANSI, Safe Area A709-14-985
Note: The part numbers listed above are for bare shaft pumps without motors.
to which this declaration relates is intended to be incorporated into other equipment and not to
function independently. The machine(s) must not be put into service until the equipment into
which it is incorporated has been brought into conformity with the provisions of the Machinery
Directive, 2006/42/EC.
The machine(s) is in conformity with the following standard(s) or other normative
document(s)
EN1012-2:1996+A1:2009 Compressors and Vacuum Pumps. Safety Requirements.
Vacuum Pumps
EN50581:2012 Technical Documentation for the Assessment of Electrical and
Electronic Products with respect to the Restriction of Hazardous
Substances
The relevant essential requirements of the Machinery Directive 2006/42/EC Annex 1 have been
applied and fulfilled so far as practicable for this partly completed machinery. The relevant
technical documentation has been compiled in accordance with Annex VII Part B. In response to
a reasoned request by the national authorities, Edwards Ltd undertakes to provide relevant
information on the partly completed machinery (via email).
Note: This declaration covers all product serial numbers from the date this Declaration was
signed onwards.
10.08.2015, Burgess Hill
P200-00-780 Issue E
Mr Peter Meares
Senior Technical Support Manager, General Vacuum
Date and Place
This product has been manufactured under a quality management system certified to ISO 9001:2008
To Next Page
Loading...
Need help?
General
