A708-01-880
Issue E Original
Instruction Manual
CDX1000 Chemical Dry Vacuum Pumps and
IDX1000 and IDX1300 Industrial Dry Vacuum Pumps
Notes: The Item Numbers listed above are for bareshaft pumps without motors. However, this manual contains
general information on pump motors. For detailed information on the specific motor fitted to the pump,
refer to the Motor Instruction Manual (P600-74-000) supplied with the pump.
The CDX/IDX Pumping System Instruction Manual (P600-74-600) supplied with the system will define the
build specification of the pump; that is, the type of motor and any accessories fitted.
If the CDX pump is part of an ATEX system, an ATEX system instruction manual (P600-74-500) will be
supplied, which defines the installation, operation and maintenance requirements for ATEX compliance.
Description Item Number
CDX1000, 30 kW, 50 Hz, Flameproof with Integral Flame Arrestors A708-01-985
CDX1000, 40 h.p., 60 Hz, Flameproof with Integral Flame Arrestors A708-11-985
CDX1000, 30 kW, 50 Hz, Flameproof (without Flame Arrestors) A708-02-985
CDX1000, 40 h.p., 60 Hz, Flameproof (without Flame Arrestors) A708-12-985
IDX1000, 22 kW, 50 Hz, Safe Area A708-03-985
IDX1000, 30 h.p., 60 Hz, Safe Area A708-13-985
IDX1000, 30 kW, 50 Hz, Safe Area, Extended Performance A708-04-985
IDX1000, 40 h.p., 60 Hz, Safe Area, Extended Performance A708-14-985
IDX1300, 30 kW, DIN, Safe Area A709-04-985
IDX1300, 40 h.p., ANSI, Safe Area A709-14-985
To Next Page
Need help?
General
