© Edwards Limited 2013. All rights reserved. Page 23
Edwards and the Edwards logo are trademarks of Edwards Limited.
Technical data
A708-01-880 Issue E
Figure 6 - CDX Dimensions: mm (inch) (key)
A. Side view
B. Plan view
C. End view
D. Front fixing dimensions with mounting feet removed
1. Pump inlet
2. Pump outlet
3. Fixing-holes: Ø18 mm (0.71 inch), 2 holes on each mounting foot
4. Fixing-holes: Ø17 mm (0.67 inch), 2 holes on each mounting bracket
Note: This Figure shows a CDX with integral flame arrestors. The inlet/outlet dimensions on a CDX without
integral flame arrestors are as shown in Figure 4.
To Next Page
Loading...
Need help?
General
