Edwards E2M18 User Manual

CE Declaration of Conformity
P20000600K
The following product
AXXX - YY - ZZZ
Pump type Variant Motor description
XXX YY ZZZ
343 = E1M18 01 to 99 903 = 220V/240V 50/60Hz Single Phase
363 = E2M18 904 = 100V/200V 50/60Hz Single Phase
930 = 220V/240V 50/60Hz Single Phase
940 = 200-230V/380-460V 50/60Hz Three Phase
981 = 115/230V 60Hz Single Phase
984 = 110/200-240V 50/60Hz Single Phase
Is in conformity with the relevant requirements of European CE legislation:
2006/42/EC
Machinery directive
2014/34/EU
ATEX directive on use in potentially explosive atmospheres.
Intertek Testing and Certification Limited, 0359
Intertek House, Cleeve Road, Leatherhead, Surrey, KT22 7SB
ATEX marking:
II 3 G Ex h IIB T4 Gc
INTERNAL ATMOSPHERES ONLY
TCF 218
2011/65/EU
Restriction of certain hazardous substances (RoHS) directive
as amended by Delegated Directive (EU) 2015/863
Based on the relevant requirements of harmonised standards:
EN 1012-2:1996 +A1:2009
Compressors and vacuum pumps. Safety requirements. Vacuum pumps
EN 61010-1:2010 *
Safety requirements for electrical equipment for measurement, control and laboratory
use. General requirements
* 1-phase pumps only
The pumps comply with EN 61010-1 when installed in accordance with the instruction
manual supplied with the pumps.
EN ISO 80079-36:2016
Explosive atmospheres – Part 36: Non-electrical equipment for explosive atmospheres.
Basic method and requirements
EN ISO 80079-37:2016
Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres --
Non-electrical type of protection constructional safety ''c'', control of ignition sources
''b'', liquid immersion ''k''
Edwards Ltd
Innovation Drive
Burgess Hill
West Sussex
RH15 9TW
UK

Edwards E2M18 Specifications

General

Brand	Edwards
Model	E2M18
Category	Water Pump
Language	English