1. Motor
2. Drive-end cover
3. Shaft-seals oil reservoir
4. Oil filler plug (drive-end cover)
5. Eye bolt (x2)
6. Unit lifting eyes (x2)
7. Inlet
8. Oil filler plug (non-drive end cover)
9. Non-drive end cover
10.Cooling-water outlet
11.Mounting feet
12.Outlet
13.Motor hub
14.Cooling-water inlet
15.Oil drain plug (each end)
16.Oil-level sight-glass (each end)
Note: Refer to Figure 3 for the mounting feet configurations of the pumps.