This product has been manufactured under a quality system registered to ISO9001
Declaration of Conformity
We, Edwards,
Manor Royal,
Crawley,
West Sussex, RH10 9LW, UK
declare under our sole responsibility, as manufacturer and person within the EU authorised
to assemble the technical file, that the product(s)
iF1800 Rapid Load Lock Dry Pumping System:
200/208 V, 50/60 Hz, 3-phase A533-23-945
440 V, 60 Hz, 3-phase A533-23-975
to which this declaration relates is in conformity with the following standard(s) or other
normative document(s)
EN1012-2:1996, A1: 2009 Compressors and Vacuum Pumps. Safety Requirements.
Vacuum Pumps
EN61010-1: 2001 Safety Requirements for Electrical Equipment for Measurement,
Control and Laboratory Use. General Requirements
EN 61326-1: 2006 Electrical equipment for measurement, control and laboratory
Use. EMC requirements. General requirements.
EN60204-1: 2006 Safety of machinery. Electrical equipment of machines.
+ A1: 2009 General Requirements
and fulfils all the relevant provisions of
2006/42/EC Machinery Directive
2006/95/EC Low Voltage Directive
2004/108/EC Electromagnetic Compatibility (EMC) Directive
Note: This declaration covers all product serial numbers from the date this Declaration was
signed onwards.
Sia Abbaszadeh, Chief Technical Office
Date and Place
P200-04-160 Issue A
9 December 2009
To Next Page
Loading...
Need help?
General
