EasyManua.ls Logo

Edwards iF1800

Edwards iF1800
126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© Edwards Limited 2009. All rights reserved. Page 29
Edwards and the Edwards logo are trademarks of Edwards Limited.
Technical Data
A533-23-880 Issue C
2.12 Connections
2.13 Item Numbers
Inlet and outlet refer to Table 4
Electrical supply connector
Type Harting HAN-K-4/2
Cable outside diameter range 18 to 27 mm
Maximum conductor cross-sectional area 16 mm
2
Pump Display Module connector XLR type 4-way
Network communications connector XLR type 4-way
Exhaust Gas Management interface 6-pin DIN [3-Common; 4-Normally Closed; 5-Normally Open]
iF Tool Interface Module connector XLR type 6-way
Nitrogen supply connector 1/4 inch Tube fitting
Water inlet connector
*
*
Connector mating-halves to connect your cooling-water supply and return pipes are supplied with the iF
system: refer to Section 3.17.
3/8 inch BSP male quick-disconnect
Water outlet connector * 3/8 inch BSP female quick-disconnect
Active gauge connector SCC68 socket
Pump Display Terminal connector RJ12
Table 10 - Item Numbers
Electrical supply iF1800
440V, 60Hz, 3-phase A533-23-974
200/208V, 50/60Hz, 3-phase A533-23-945

Table of Contents

Related product manuals