Edwards iF1800

© Edwards Limited 2009. All rights reserved. Page 17
Edwards and the Edwards logo are trademarks of Edwards Limited.
INTRODUCTION
A533-23-880 Issue C
Figure 8 - Label fixing positions on the FDP and HMB
A. HMB
B. FDP
1. Use only Fomblin Drynert 25/6 Oil
2. Caution! Do not overfill with oil
3. HMB Information/Warning! Risk of High
Temperature symbol
4. Direction of Rotation Arrow
5. HMB Motor Rating Information
6. Warning! Risk of Electric Shock symbol
7. Suction
8. Caution, High Temp. Keep hand away
9. Use perfluoropolyether oil
10.Delivery
11.Hot surface symbol
12.Oil drain
13.Oil Inlet
14.Thermistor and snap switch information
15.FDP Motor rating
16.General warnings
17.Do not oil symbol