This product has been manufactured under a quality system registered to ISO9001
Declaration of Conformity
We, Edwards,
Manor Royal,
Crawley,
West Sussex, RH10 9LW, UK
declare under our sole responsibility, as manufacturer and person within the EU authorised
to assemble the technical file, that the product(s)
Standard HTX Where xxx is as follows:
iH80 A590-00-xxx
iH600 A590-20-xxx 908 – 460V, 60Hz, 3-phase
iH1000 A590-30-xxx 945 – 200/208V, 50/60Hz, 3-phase
iH160 A590-10-xxx A590-12-xxx 946 – 380/415V, 50Hz, 3-phase
iH1800 A590-40-xxx A590-42-xxx 957 – 230V, 60Hz, 3-phase
iH1800 NRV A590-50-xxx A590-52-xxx
iH interface Module fitting kit A505-35-000
iH enclosure extraction fan (for iH80 and iH600 only) A505-39-000
iH Light Duty exhaust check valve A505-56-000
to which this declaration relates is in conformity with the following standard(s) or other
normative document(s)
EN1012-2:1996, A1: 2009 Compressors and Vacuum Pumps. Safety Requirements.
Vacuum Pumps
EN61010-1: 2001 Safety Requirements for Electrical Equipment for Measurement,
Control and Laboratory Use. General Requirements
EN 61326-1: 2006 Electrical equipment for measurement, control and laboratory
Use. EMC requirements. General requirements.
UL61010A: 2002 Safety requirements for electrical equipment for measurement,
Control and laboratory use – Part 1: General requirements
SEMI S2-93A Environmental Health and Safety Guideline for semiconductor
Manufacturing Equipment.
and fulfils all the relevant provisions of
2006/42/EC Machinery Directive
2006/95/EC Low Voltage Directive
2004/108/EC Electromagnetic Compatibility (EMC) Directive
Note: This declaration covers all product serial numbers from the date this Declaration was
signed onwards.
Sia Abbaszadeh, Chief
To Next Page
Loading...
Need help?
General
