© Edwards Limited 2014. All rights reserved. Page 21
Edwards and the Edwards logo are trademarks of Edwards Limited.
OPERATION
D397-51-880 Issue E
4.7.10 Module 10 - Motor Drive software version
Applicability: All control units covered by this manual.
Output bytes: None
Input bytes: 4 bytes are 4 ASCII characters i.e. an ASCII text string.
4.7.11 Module 11 - Active Magnetic Bearing software version
Applicability: All control units covered by this manual.
Output bytes: None
Input bytes: 4 bytes are 4 ASCII characters i.e. an ASCII text string.
4.7.12 Module 12 - Profibus software version
Applicability: All control units covered by this manual.
Output bytes: None
Input bytes: 2 bytes are 2 ASCII characters. The first character represents software type, which can be a
number or a letter. The second character is the revision letter.
4.7.13 Module 13 - Pump Serial Number
Applicability: All control units covered by this manual.
Output bytes: None
Input bytes: 10 bytes are 10 ASCII characters.
4.7.14 Module 14 - Control Unit Serial Number
Applicability: All control units covered by this manual.
Output bytes: None
Input bytes: 10 bytes are 10 ASCII characters.
4.7.15 Module 15 - Pump Run Time
Applicability: All control units covered by this manual.
Output bytes: None
Input bytes: 4 bytes form a 32-bit unsigned number which is the pump running counter in minutes.
4.7.16 Module 16 - Control Unit Run Time
Applicability: All control units covered by this manual.
Output bytes: None
Input bytes: 4 bytes form a 32-bit unsigned number which is the pump running counter in minutes.
To Next Page
Loading...
