"
Install at least one EEVE-sign at each entrance to the area where the personal robot is
active. In case of an open area, place at least a sign at every 6 meter distance along the
border of the open area."
There is one EEVE-sign included in the standard package of your personal robot. This in
the form of an outdoor sticker. In case you need one or more EEVE-sign plates or you
need more EEVE-sign stickers you can order them via our website shop at www.eeve.com
or via our support team by sending a mail to support@eeve.com."
4.6.3 Working Conditions "
#
WARNING
!
Sparks generated from operation of the personal robot may be capable of igniting
combustible gases, liquids, vapors, dusts or other combustible materials and substances.
To reduce the risk of fire and explosion: "
! – Never operate the personal robot in a location where combustible gases, liquids,
vapors, dusts or other combustible materials and substances are present. "
! – Read and follow recommendations issued by government authorities for
identifying and avoiding the hazards of combustible gases, liquids, vapors, dusts or other
combustible materials and substances. "
If a rotating metal blade strikes a rock or other hard object, sparks may be created, which
can ignite flammable materials under certain circumstances. Flammable materials can
include dry vegetation and brush, particularly when weather conditions are hot and dry. "
! – When there is a risk of fire or wildfire, do not use the personal robot around
flammable materials or around dry vegetation or brush. "
! – Contact your local fire authorities if you have any question about whether
vegetation and weather conditions are suitable for the use of a metal blade. #
Use of this personal robot can generate dust and other substances containing chemicals
known to cause respiratory problems, cancer, birth defects and other reproductive harm. "
! – Consult governmental agencies and other authoritative sources on hazardous
materials if you are unfamiliar with the risks associated with the particular substances you
are cutting or with which you are working. "
To Next Page
Loading...