To reduce the risk of electric shock:"
! – Unplug the power supply from the electrical outlet before inspecting the docking
station. "
! – Regularly check the docking station and ensure that the insulation of the power
supply cord and plug are in good condition and show no signs of aging (brittleness), wear
or damage."
! – Replace the charging station if its power supply cord or plug is damaged. "
Improper storage can result in unauthorized use, damage to the personal robot, its
integrated battery and docking station, and an increased risk of fire, electric shock and
other personal injury or property damage. "
! – Activate the disabling device. "
! – Allow the personal robot to cool down for approximately 1 hour before storing."
! – Before storing, always unplug the docking station from the electrical outlet. "
! – Store the personal robot and docking station indoors in a dry, secure place that
cannot be accessed by children or other unauthorized users. Only store the personal
robot after the disabling device has been activated. Never charge the personal robot
indoors."
! – Store the personal robot only within an ambient temperature range of 32 °F to
122 °F (0 °C to 50 °C). "
SAVE THESE INSTRUCTIONS #
7. Operating principal
Willow and Willow Pro are personal robots, designed for autonomously performing work
tasks. More specifically tasks such as guarding (a property, a yard), observing (flowers,
birds…), seeking, analyzing, mowing. New work tasks can be provided via a software
update or a hardware accessoires."
In order to localise itself on the map you need to show your environment to your personal
robot by walking around your yard while your personal robot is following you or by driving
around with your personal robot (see installation instructions)."
To Next Page
Loading...