A damaged or loose mowing blade may vibrate, crack, break or come off the personal
robot, which may result in serious or fatal injury."
! – Make sure the mowing blades are undamaged and properly tightened before
starting work. "
! – If a mowing blade loosens after being properly tightened, stop work immediately
and have the personal robot repaired by your authorized EEVE Partner. "
! – Never use a personal robot with a loose or damaged mowing blade. "
5. Docking Station
5.1 Introduction"
This section contains the general safety warnings and instructions prescribed for the
docking station and power supply. Additional important warnings and instructions are
provided in subsequent sections of this manual. #
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
#
WARNING#
#
When using the docking station and power supply, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and personal injury and
property damage, including the following: "
1) READ AND FOLLOW ALL SAFETY INSTRUCTIONS. "
2) Read and follow all instructions that are on the docking station and power supply or
provided with the docking station or power supply. "
3) Do not use an extension cord. "
4) Reference the National Electrical Code, specifically for the installation of wiring and
clearances from power and lighting conductors. "
5) Installation work and electrical wiring must be done by qualified person(s) in
accordance with all applicable codes and standards, including fire-rated construction. "
6) Do not install or use within 19.5 feet (6 meter) of a swimming pool. "
7) Do not use in a bathroom. "
8) WARNING: Risk of Electric Shock. When used outdoors (the only usage allowed),
install only to a covered Class A GFCI protected receptacle that is weatherproof with the
power supply connected to the receptacle. If one is not provided, contact a qualified
electrician for proper installation. Ensure that the power supply and cord do not interfere
with completely closing the receptacle cover. "
To Next Page
Loading...