Your personal robot safeguards your yard when she is at the docking station. Your
personal robot is deactivated by default, you need to set the safeguard time via your
personal robot settings menu."
During the safeguard time your personal robot will activate her infrared vision and search
for people. When she detects a person during that timeframe, she will capture a photo
and send it to the EEVE application on your smartphone. "
The EEVE application will receive an alert message and ring a notification to you. You will
be able to see the picture via your EEVE application."
12. During operation
#
WARNING "
Keep bystanders away from the mowing area during active times. Never allow
children to approach or play with the personal robot during active mowing times. Keep
children out of the mowing area while the mower is in operation. Never allow the personal
robot to mow if you know that animals or persons are or may be in the mowing area or
vicinity."
The personal robot independently leaves the docking station and mows the lawn during
the active mowing times. The mowing plan is determined based on the size of the
mowing area calculated during installation or during the creation of a new mowing plan. "
When the battery is discharged, the personal robot automatically returns to the docking
station. #
13. Adjusting the mowing height
There are two different Willow and Willow Pro versions, one with a manual mowing height
adjusting system and one with an electronic mowing height adjusting system, called the
Da Vinci’s Pencil. Willow’s from serial number 700 onwards have the Da Vinci’s Pencil."
13.1 manual height adjustment"
To adjust the mowing height, you need to replace the mowing disc. There are following
disc available:"
• For a mowing cutting height of 1.53 inch or 3,9 cm."
• For a mowing cutting height of 1.77 inch or 4,5 cm (installed by default)."
• For a mowing cutting height of 1.97 inch or 5,4 cm."
#
To Next Page
Loading...