WARNING"
To reduce the risk of serious personal injury or death, always disable the device before
adjusting the cutting height of the mowing blade. "
NOTICE "
To avoid overloading the motor, avoid setting the cutting height too low in tall grass. If the
motor speed begins to slow, raise the cutting height. "
WARNING"
Always wear heavy-duty, non-slip work gloves made of leather or another wear
resistant material when adjusting the mowing height."
How To?"
1. Hold the mowing disc with one hand (! Always
wait heavy-duty gloves) and unscrew the nut in
the center of the mowing disc with your other
hand."
2. Remove the nut and the mowing disc. Make sure
the pin stays inside the mowing motor shaft."
3. Place the new disc and align the pin so that the
pin goes inside the mowing disc."
4. Hold the mowing disc with one hand (! Always
wait heavy-duty gloves) and screw the nut in the
middle of the mowing disc with your other hand."
13.2 electronic height adjustment - the Da Vinci’s Pencil"
In case you have a robot serial number higher then 700 you can use the electronic height
system to adjust the height."
You can adjust the height via the robot settings in the EEVE app.#
#
Open the settings and tap on Mowing height."
Adjust the height."
"
To Next Page
Loading...