Effekta MH6000 - LCD Display Symbols

UPS MH6000 Manual
MH Series
Page 16 of 51
6.1.2 Symbols on the LCD-display
Symbol
Description
LINE
Source of supply or bypass
low battery
battery fault
UPS overcharge
UPS works in the defined mode*
A blackout transfer has appeared at the output of the UPS.
Bypass input out of the tolerance, UPS can not switch to
bypass, bypass fault in the eco-mode.
Power supply out of the tolerance
OFF
UPS disconnection
LINE
OFF
UPS failure and blocked
UPS flowchart.
4-digit display.
Index on the detected element.
UPS switch-on / alert switch-off
UPS switch-off
Return to the last page or change the installation.