UPS: MKD 700 – 3000 VA RT (XL) Operation and Service
6.2.7 Alarm mode of the UPS
The UPS switches the output off provided the UPS
switches to the error mode due to an internal
problem. The loads will no longer be supplied; the
display pictured here appears (for example). An
acoustic signal (constant tone) is emitted during this
mode of operation.
For security reasons, the UPS cannot automatically execute a return from the
error mode. It is necessary here to reset the error status in the “control center”
submenu. This can, however, only be carried out if the source of the error has
first been eliminated.
A complete list of all error codes is summarized under 8 Me.
To Next Page
Loading...
