Eighteeth E-xtreme - Page 47

11 Technical Data
Page
47
/
52
Guidance and manufacturer’s declaration – electromagnetic
immunity
The E-xtreme is intended for use in the electromagnetic environment
specified below. The customer or the user of the E-xtreme should
assure that it is used in such an environment.
Immunity
test
IEC 60601
test level
Compli-
ance
level
Electromagnetic
environment -
guidance
Conducted
disturbances
induced by RF
fields
IEC 61000-4-6
Radiated RF
EM fields
IEC 61000-4-3
3 V
0.15 MHz – 80
MHz, 6 V in
ISM bands
between 0.15
MHz and 80
MHz, 80 % AM
at 1 kHz
3 V/m, 80
MHz – 2,7
GHz, 80 % AM
at 1 kHz
See the RF
wireless
communicate-
on equipment
table in
"Recommend-
ed minimum
separation
distances"
3 V
3V/m
Portable and mobile
RF communications
equipment should
be used no closer to
any part of the
E-xtreme, including
cables, than the
recommended
separation distance
calculated from the
equation applicable
to the frequency of
the transmitter.
Recommended
minimum separ-
ation distances
See the RF wireless
communication
equipment table in
"Recommended
minimum separa-
tion distances"
Proximity
fields from RF
wireless
communicate-
on equipment
Compli-
es
IEC 61000-4-3