6 Operation
Page 12 / 28
Connect the adapter to the handpiece.
Only the original adapter can be used.
Charging indication appears on the power
LED, and flashes in “YELLOW”(③), when
the battery is fully charged or in a state near
full charge, the flash will stop and light up in
“GREEN” (③).
Fully charged will take about 4 hours,
depending on residual battery power and
battery state.
It can be recharged 300-500 times,
depending on the operating conditions of
the device.
When changing, other function will forcibly
stop and get in to the charging mode.
Do not change the battery, only trained technician or distributor can change the
battery, the electronic parts will be damaged if use a wrong battery or install with
a wrong way.
To Next Page
Loading...
