9
About the Monitor
Cleaning
Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime.
Gently wipe o any dirt on the cabinet or panel surface with a soft cloth soaked in a small amount of
water or one of the chemicals listed below.
Chemicals that may be used for cleaning
Material name Product name
Ethanol Ethanol
Isopropyl alcohol Isopropyl alcohol
Benzalkonium chloride Welpas
Glutaral Sterihyde
Glutaral Cidex Plus28
Ammonia Ammonia water
Hydrogen peroxide Hydrogen peroxide solution
Alkyldiaminoethylglycine hydrochloride Satenidin solution
Benzalkonium chloride Zalkonin solution
Benzethonium chloride Bezeton solution
Attention
• Do not use chemicals on a frequent basis. Chemicals such as alcohol and antiseptic solution may cause gloss
variation, tarnishing, and fading of the cabinet or panel, and also quality deterioration of the image.
• Never use any thinner, benzene, wax, or abrasive cleaner, which may damage the cabinet or panel.
• Do not let chemicals come into direct contact with the monitor.
About Cleaning the 3D Fogless Polarized Glasses
Since the anti-fog treatment on the inner side of the lens makes it susceptible to damage, wipe the
lens gently with your nger using a soft cloth or gauze soaked in a small amount of ethanol.
How to use the monitor comfortably
• Look at the screen from a proper distance and from a proper angle.
• If you become fatigued or experience discomfort while viewing 3D images, stop using the monitor.
Cybersecurity warnings and responsibilities
• Firmware update should be performed through EIZO Corporation or its distributor.
• If EIZO Corporation or its distributor instructs to update the rmware, update it immediately.
To Next Page
Loading...
Need help?
General