Why does the cursor jump on my Eizo DURAVISION FDX1201T?
If the cursor position is incorrect or jumps on your Eizo Monitor, try turning the monitor off and on again. If the issue persists, perform a calibration on the monitor, and ensure you are only touching the screen with one finger.
What to do if the Eizo Monitor power light is blue but there's no display?
If the power indicator on your Eizo Monitor lights blue but there is no picture, check that the connected device is powered on, switch the input signal, and increase the [Brightness] and [Contrast] settings.
How to remove interference patterns from Eizo Monitor?
If you see interference patterns or pressure marks on the screen of your Eizo Monitor, leaving the monitor displaying a white or black screen may resolve the issue.
How to prevent afterimages on Eizo DURAVISION FDX1201T Monitor?
To prevent afterimages on your Eizo Monitor, avoid displaying the same image for extended periods. When displaying the same image for a long time, set up a screen saver or use the power saving function.
Why doesn't the Event Selector work on my Eizo DURAVISION FDX1201T Monitor?
When 'Drag then click' is set in the [Click Mode] menu of the [UPDD Console] window, the Event Selector on your Eizo Monitor will not function.
Eizo Monitor power light is on but no display. What to do?
If your Eizo monitor's power indicator lights blue but there's no picture, first ensure that the connected device is powered on. If it is, try switching the input signal. You may also need to increase the [Brightness] and [Contrast] settings.
General| Screen Size | 12.1 inches |
|---|---|
| Resolution | 1024 x 768 |
| Panel Type | TFT LCD |
| Contrast Ratio | 700:1 |
| Input Signal | DVI-D, VGA |
| Operating Temperature | 0 - 40 °C |
| Viewing Angle | 160°/140° (H/V) |
Explains the location and operation of all buttons, ports, and indicators on the monitor.
Step-by-step instructions for connecting the monitor to various input sources.
Addresses general issues like no picture, screen brightness, dots, interference, and afterimages.
Covers messages like "No PC Signal", "PC Signal Error", and display position problems.
Discusses cursor issues, ineffective touch operation, and calibration reflection problems.
To Next Page