OPERATION
SM-DK50 DS-EN-20_02-2016 15
Close the plug located on the neck of the vessel before moving any
vessel containing a liquid!
Cleaning and replacing the filters
At least once a week take out and clean the suction filter (15) located on the
back side. Wash the filter in warm soapy water, rinse thoroughly and allow it
to dry. Insert the clean filters so that the intake openings are completely
covered by the filters.
Cleaning the compressor
To clean the compressor, use a detergent that contains no abrasives,
chemical solvents or other corrosive agents.
To Next Page
Loading...
