Elan D400 - System Expansion-Mono

ELAN HOME SYSTEMS
© ELAN Home Systems 2005 • All rights reserved. Page 13
D400/D401 INSTALLATION MANUAL
System Expansion-Mono
To add additional mono rooms or zones to a basic system, simply add an
another D400. Use RCA "Y" cables to combine an audio source's signal to
the inputs of D400 #1. Use a mono RCA cable to send that signal to additional
amplifiers as shown below.
Audio
Source
L
R
RCA “Y”
Cable
D400 Rear
RCA Mono
Patch Cable
D400 Rear
RCA Mono
Patch Cable
RCA Mono
Patch Cable
System Expansion-Mono
• Use RCA “Y” Cable to Combine L & R Audio
• Audio Source to Line Input 1 of D400 #1
• Line Output 1 to Line Input 2 of D400 #1
• Line Output 2 of D400 #1 to Line Input #1 of D400 #2
• Line Output 1 to Line Input 2 of D400 #2
All Speakers Connected to Both Amps Volume
Ramps Up/Down Together