ELAN HOME SYSTEMS TS7 User’s Guide
© ELAN Home Systems 2010 | All rights reserved.
Page 13
Security (Continued)
Zone Bypass
To bypass a faulted zone you, press the BYPASS button for that zone. The alarm must be
programmed by your dealer to allow zones to be bypassed.
Press BYPASS again for that zone to disable the bypass setting.
The status page will now show that the alarm has been armed and that the zones have been
bypassed.
Talk to your dealer for additional information regarding your Security system.
Figure 3-14:
Security Zone
Bypass
Figure 3-15:
Outside Keypad
To Next Page
Loading...
Need help?
General