4. PRESENTATION
First, we would like to take this opportunity to thank you for your purchase of ELBO CONTROLLI’s
E346+/V+ Presetters; you will certainly have great satisfaction with the decision you have made and you
will increase the productivity of your NC machines.
E346+/V+ tool presetter have been manufactured in compliance with ergonomics and simplicity principles
and offer outstanding technological solutions. The mechanical systems, electronics and software deal with
tool measurement and pre-adjustment. The vision system, designed by ELBO CONTROLLI, is used to
collect measurement data automatically.
The excellent value for money and measurement precision make the E346+ e E346V+ one of a kind.
TECHNICAL FEATURES
▪ Measuring range: diameter max 360 mm (radius 180 mm); height max 460 mm.
▪ Base and column made of natural granite: linearity max error 2 μm/Mt certification with Taylor Hobson
res.1 μm/Mt electronic millesimal level.
▪ Machine structure in electro-welded and detensioned steel.
▪ ISO/BT/HSK/POLYGONAL TAPER... etc. interchangeable rotating spindle-holder (to be specified)
max run-out error < 4 μm.
▪ Double vault arc prismatic slideways: N°2 X axis slideways; N°1 Z axis slideway.
▪ Double re-circulating ball bearing slides lubricated for life (3) (preloaded slides/slideways: P/H class).
▪ Manual mechanical braking of the interchangeable spindle-holder rotation.
▪ Tool clamping with VACUUM system (Only E346V+ model).
▪ Vision-system for tool measuring including:
o C-MOS sensor-framed imaged area 6,4 x 6,4 mm.
o Magnifications 25X.
o Cutting inspection.
▪ Machine operator interface:
o Vertical Touch Screen TFT 15” colour 16:9.
o Intel Celeron Series N 4 Core.
o UBUNTU LINUX operating system.
o SSD solid state disk data storage.
▪ Standard Software:
o CNC machine origin management and adapters.
o Tool list creation and/or single tool.
o Tool set and Post Processor universal generator.
o Magnetic chip code-holders (Balluff for example, hardware not included).
o Printable tool set report.
o Management of theoretical measurements and tolerances.
▪ Analog comparators to measure on the fix reticule.
▪ Telecentric lens and LED illuminator.
▪ Axes resolution: X = 1 μm, Z = 1 μm.
▪ TID (Automatic Tool Identification System) ready.
▪ Overall dimensions: L = 950mm, H = 972mm, P = 430mm
▪ Net weight: 90 Kg
To Next Page
Loading...
