114 / EN
Service
Cleaning and inspecting
the indoor unit
Only use a soft and dry cloth to clean
the unit.
If the unit is very dirty, it is possible to
use a cloth dampened with lukewarm
water.
Check that the drainage pipe is laid ac-
cording to the instructions. If not, water
leakages may occur resulting in material
damages and the risk of fire and elec-
trocution.
1 2
Fig. 73
Cleaning and inspecting
the outdoor unit
Only use a soft and dry cloth to clean
the unit.
If the unit is very dirty, it is possible to
use a cloth dampened with lukewarm
water.
If the evaporator (1) of the outdoor unit
is clogged up, remove all leaves and de-
bris, then clean off all dust with a water
jet or some water. Repeat the same pro-
cedure with the front grille (2).
To Next Page
Loading...