®
Bluetooth (T) and USB Data output (BT)
Elcometer 224 gauges have the ability to transfer data via USB to a
®
computer or wirelessly via Bluetooth technology to PC’s, PDA’s or
®
mobile phones which are Bluetooth enabled using ElcoMaster™ 2.0
or ElcoMaster™ for Android™.
®
Bluetooth data output can be switched on via
Menu/Bluetooth/Enable Bluetooth. For more information
regarding ElcoMaster™ 2.0 see page 27 Downloading Data.
ElcoMaster™ 2.0 Data output (BT)
Users can download data from any Elcometer gauge directly into
ElcoMaster™ 2.0 by connecting the gauge to the PC and following the
on screen prompts.
Once the data has been transferred to the computer, the user can
produce professional reports in seconds. Data can also be
®
transferred into programs, such as Excel , in a similar manner.
For more information regarding ElcoMaster™ 2.0 see page 27
Downloading Data.
Calibration Lock (T)
To avoid accidental amendments to the calibration settings switching
on the Cal/Calibration Lock feature’ locks’ the user from undertaking
any changes to the calibration without first un-checking the
Cal/Calibration Lock feature.
When the Calibration Lock is enabled, users can still test the
calibration via Cal/Test Calibration but will be unable to validate or
re-calibrate the gauge.
Counted Average (BT)
Users can pre-define the number of readings using the counted average
function. When in batching (T), select Batch/New Batch/Batch
Type/Counted Average and set the number of readings as required.
The average of this pre-defined number will be saved into the batch, but
the individual readings within the counted average are not saved. When
not in batching (B & T), select Display/Statistics/Counted Average
and set the number of readings as required.
en
R
www.elcometer.com
13
To Next Page
Loading...
