ELECTRO FREEZE Shake Model CS705
184592
8
Figure 4-2 Beater Shaft Assembly
1
SHAFT-BEATER
Rotates in the freezing cylinder,
blending air and mix and ejecting
product.
2
BLADE-SCRAPER
Scrapes the frozen product from
the freezing cylinder wall.
3
SEAL (CUP) - BEATER SHAFT
Seals the opening between the
freezing cylinder and the beater.
DO NOT LUBRICATE.
4
WASHER - SHAFT SEAL
Holds the shaft seals together.
Must be lubricated.
The following part names and descriptions
refer to figure 4-2.
4. Part Names and Functions — continued
SEAL-BEATER
SHAFT (CUP)
SEAL(CUP)-BEATER SHAFT
BLADE-SCRAPER
WASHER-DOUBLE SHAFT
SEAL
BLADE-SCRAPER
SHAFT-BEATER
SEAL(CUP-BEATER SHAFT
To Next Page