ELECTRO FREEZE Shake Model CS705
184592
9
Figure 4-3 Mix Feed Tube
4. Part Names and Functions — continued
The following part names and descriptions refer to figure 4-3.
1 TUBE-MIX FEED
Meters the correct amount of mix
and air into the freezing cylinder
from the hopper.
2 INSERT-ASSEMBLY MIX FEED
(Regulator)
Regulates mix flow. Open position
for day operation and closed
position for night.
3 O-RING-INSERT ASSEMBLY
Holds the insert in place in the mix
tube. Must be lubricated.
TUBE-MIX FEED
O-RING
O-RING
INSERT-ASSY.
MIX FEED
4 O-RING-MIX FEED ASSEMBLY
Seals the opening between the
hopper and mix feed tube. O-rings
do not need lubrication.
To Next Page