Electro-Voice ELX200-12 - Recommended configurations; Basic stereo system using full-range systems

ELX200 Passive Loudspeakers Recommended configurations | en 15
Electro-Voice
Installation manual
2019-04 | 02 | F.01U.326.890
5 Recommended configurations
5.1 Basic stereo system using full-range systems
Basic stereo system using ELX200-10, ELX200-12 or ELX200-15 loudspeakers (ELX200-15
versions shown).
Input A
Input B
Mixer
Amplifier
Output 1
Output 2
ELX200-10,
ELX200-12,
or
ELX200-15
NL4 Pin Configuration
Pin 1+ and 1- Used
Pin 2+ and 2- Not used
!
Caution!
Do not exceed the maximum load rating of the amplifier.
Amplifier Load (per Output Channel)
# of Speakers Nominal Minimum
1 8 Ohms 7.2 Ohms
2 4 Ohms 3.6 Ohms
3 2.7 Ohms 2.4 Ohms
4 2 Ohms 1.8 Ohms