Electro-Voice ELX200-12 - Stacking full-range systems with subwoofers

ELX200 Passive Loudspeakers Recommended configurations | en 17
Electro-Voice
Installation manual
2019-04 | 02 | F.01U.326.890
5.3 Stacking full-range systems with subwoofers
This configuration allows a user to increase the low frequency performance without using
additional amplifier channels (ELX200-15 and ELX200-18S versions shown).
Mixer
Output 2
Input A
Input B
Output 1
ELX200-10,
ELX200-12,
or
ELX200-15
ELX200-12S
or
ELX200-18S
Amplifier
NL4 Pin Configuration
Pin 1+ and 1- Used
Pin 2+ and 2- Not used
!
Caution!
Do not exceed the maximum load rating of the amplifier.
Amplifier Load (per Output Channel)
# of Subwoofer/Full-Range
Combinations
Nominal Minimum
1 4 Ohms 3.8 Ohms
2 2 Ohms 1.9 Ohms