Electro-Voice ELX200-12 - Dimensions

20 en | Technical data ELX200 Passive Loudspeakers
2019-04 | 02 | F.01U.326.890
Installation manual
Electro-Voice
ELX200-12S and ELX200-18S
ELX200-12S ELX200-18S
Freq. response (-3 dB)
1
: 42 Hz - 220 Hz 45 Hz - 200 Hz
Freq. range (-10 dB)
1
: 33 Hz - 300 Hz 28 Hz - 300 Hz
Axial sensitivity
1
: 93 dB 94 dB
Maximum SPL
1,2
: 129 dB 133 Hz
Recommended high-pass
freq.:
42 Hz 35 Hz
Power handling: 400 W Continuous, 1600 W Peak
LF transducer: EVS-12L 300 mm (12 in) EVS-18L 457 mm (18 in)
Nominal Impedance: 8 Ω
Minimum impedance: 6.9 Ω 7.2 Ω
Connectors: Dual NL4
Enclosure: 15 mm plywood with durable polyurea top-coat finish
Grille: 18 AWG steel with powdercoat
Color: Black or white
Dimensions (H x W x D):
mm (in)
397 x 445 x 457
16.7 x 17.6 x 18.0
600 x 507 x 574
23.7 x 20.0 x 22.6
Net weight: 17.2 kg (38.0 lb) 26.6 kg (58.7 lb)
Shipping weight: 20.2 kg (44.6 lb) 30.5 kg (67.3 lb)
1
Half-space measurement.
2
Maximum SPL is measured at 1 m using broadband pink noise at rated peak power rating.
7.1 Dimensions
330 mm
[13 in]
273 mm [11 in]
140 mm [6 in]
531 mm
[21 in]
226 mm [9 in]
220mm
[9 in]
319 mm [13 in]
118 mm [5 in]
Figure7.1: ELX200-10 dimensions
363 mm
[14 in]
311 mm
[12 in]
155 mm [6 in]
629 mm
[25] in
253 mm [10 in]
256 mm
[10 in]
344 mm [14 in]
163 mm
[6 in]
Figure7.2: ELX200-12 dimensions