Electro-Voice ELX200-12 - Technical data

ELX200 Passive Loudspeakers Technical data | en 19
Electro-Voice
Installation manual
2019-04 | 02 | F.01U.326.890
7 Technical data
ELX200-10, ELX200-12, and ELX200-15
ELX200-10 ELX200-12 ELX200-15
Freq. response (-3 dB)
1
: 65 Hz - 20 kHz 77 Hz - 17 kHz 77 Hz - 16 kHz
Freq. range (-10 dB)
1
: 49 Hz - 22 kHz 51 Hz - 20 kHz 52 Hz - 19 kHz
Axial sensitivity
1
: 90 dB 93 dB 95 dB
Maximum SPL
1,2
: 127 dB 128 dB 130 dB
Recommended high-pass
freq.:
55 Hz 50 Hz 42 Hz
Coverage (H x V): 90˚x 60˚
Power handling: 300 W Continuous, 1200 W Peak
LF transducer: EVS-10M 254 mm
(10 in)
EVS-12M 300 mm
(12 in)
EVS-15M 381 mm
(15 in)
HF transducer: DH-1L 1-inch titanium compression driver
Crossover freq.: 2 kHz 1.7 kHz 1.6 kHz
Nominal impedance: 8 Ω
Minimum impedance: 7.2 Ω 7.5 Ω 7.0 Ω
Connectors: Dual NL4
Enclosure: Polypropylene
Grille: 18 AWG steel with powdercoat
Suspension: (3) M10 suspension points
Color: Black or white
Dimensions (H x W x D):
mm (in)
531 x 330 x 319
(21.0 x 13.0 x 12.6)
629 x 363 x 344
(24.8 x 14.3 x 13.6)
710 x 423 x 384
(28.0 x 16.6 x 15.1)
Net weight: 13.4 kg (29.6 lb) 15.2 kg (33.4 lb) 18.7 kg (41.2 lb)
Shipping weight: 15.3 kg (33.7 lb) 17.1 kg (37.7 lb) 21.4 kg (47.2 lb)
1
Full-space measurement.
2
Maximum SPL is measured at 1 m using broadband pink noise at rated peak power rating.