Electro-Voice ELX200-12 - Floor monitor

ELX200 Passive Loudspeakers Tripod and floor monitor operation | en 11
Electro-Voice
Installation manual
2019-04 | 02 | F.01U.326.890
3.2 Floor monitor
ELX200-10, ELX200-12, and ELX200-15 loudspeakers may be used as a floor monitor by
placing the loudspeaker on the integral monitor angle.
To set up a loudspeaker as a floor monitor, do the following:
1. Place the loudspeaker on a level and stable surface.
2. Safely route cables to prevent injury to performers, production crew, and audience
members.
i
Notice!
Secure cables with wire ties or tape whenever possible.
90°
50°
60°
OPTIMAL
COVERAGE
OPTIMAL
COVERAGE
Figure3.2: Optimum coverage in monitor position (side view left and front view right)