Electro-Voice ELX200-12 - Using full-range systems as stage monitors

16 en | Recommended configurations ELX200 Passive Loudspeakers
2019-04 | 02 | F.01U.326.890
Installation manual
Electro-Voice
5.2 Using full-range systems as stage monitors
Multiple ELX200-10, ELX200-12 or ELX200-15 loudspeakers in monitor position (ELX200-15
versions shown).
Amplifier
Mixer
Output 1
Output 2
Input B
Input A
NL4 Pin Configuration
Pin 1+ and 1- Used
Pin 2+ and 2- Not used
!
Caution!
Do not exceed the maximum load rating of the amplifier.
Amplifier Load (per Output Channel)
# of Speakers Nominal Minimum
1 8 Ohms 7.2 Ohms
2 4 Ohms 3.6 Ohms
3 2.7 Ohms 2.4 Ohms
4 2 Ohms 1.8 Ohms