TOUR GRADE SERIES
Owner’s Manual 37
IRIS-Net™
Configuring and controlling a remote amplifier with a RCM-
26 module installed is possible through the use of IRIS-
Net™ (Intelligent Remote & Integrated Supervision) PC-
software. IRIS-Net™ allows programming the RCM-26
module’s complete configuration while the computer is off-
line. All instructions on how to configure, operate and
monitor all RCM-26 functions are included in the IRIS-Net™
help files.
Illustration 4.2: Pre Fader mode (left) and Post Fader mode (right)
Illustration 4.3: DSP flow diagram of the
RCM-26
To Next Page
Loading...
