EasyManua.ls Logo

Electro-Voice ZLX-12P-G2 - Tripod, Pole Mount and Floor Monitor Operation; Tripod or Pole Mount

Electro-Voice ZLX-12P-G2
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16 en | Tripod, pole mount and floor monitor operation ZLX-G2 Full-range loudspeaker
2023-10 | 01 |
User manual
Bosch Security Systems, LLC
6 Tripod, pole mount and floor monitor operation
6.1 Tripod or pole mount
ZLX portable loudspeakers mount on a tripod stand or on a pole above a subwoofer.
Mounting a loudspeaker on a tripod stand
!
Caution!
Tripod is not evaluated for safety with this loudspeaker. Check the specifications of the
tripod stand to be certain it is capable of supporting the weight of the loudspeaker.
!
Caution!
Do not stack additional loudspeakers.
!
Caution!
We recommend that two or more persons lift and place heavier loudspeakers. Single
person lift and placement of heavier loudspeakers could cause injury.
To mount a loudspeaker on a tripod stand, do the following:
1. Place the tripod stand on a level and stable surface.
Fully extend the legs on the tripod stand.
Do not compromise the tripod stand's structural integrity by trying to make the
stand taller.
Do not attempt to mount more than one loudspeaker on a stand designed for a
single loudspeaker.
2. Loosen the set screw.
Figure6.1: 8-inch models

Related product manuals