Electro-Voice ZLX-12P-G2 - Page 19

ZLX-G2 Full-range loudspeaker Tripod, pole mount and floor monitor operation | en 19
Bosch Security Systems, LLC
User manual
2023-10 | 01 |
Setting up a loudspeaker in kickback position
Kickback monitor position is only available in 12-inch and 15-inch ZLX-G2 models.
To set up a loudspeaker in kickback position:
1. Place the loudspeaker on a level and stable surface.
2. Tilt the loudspeaker rearward to rest securely in the kickback position.
3. Safely route cables to prevent injury to performers, production crew, and audience
members.
4. Set the loudspeaker location to KICKBACK in the DSP control menu.
25º
60º
OPTIM
AL
COVERAGE
Figure6.4: Optimum coverage in KICKBACK position
i
Notice!
Secure cables with wire ties or tape whenever possible.