ATS-5X User Manual Page 39 of 44
Filters
C-Message
3.4 kHz Flat
D Filter
15 kHz Flat
1010 Hz Notch
C-Message & 1010 Hz Notch
None (20 kHz Flat)
23-Tone
Transmit Level
Range: -40 dBm to +4 dBm
Resolution: 0.01 dB
Accuracy: ±0.2 dB
Flatness: 0.1 dB
Receive Level
Range: -90 dBm to +4 dBm
Resolution: 0.01 dB
Accuracy: ±0.2 dB
Flatness: 0.1 dB
Envelope Delay Distortion
Range: -1800µs to +1800 µs
Resolution: 0.1 µs
Accuracy: ±5 µs
Signal to Inter-modulation Distortion
Range: -100 dB to +100 dB
Resolution: 0.01 dB
Accuracy: ±0.2 dB
Signal to Noise
Range: -100 dB to +100 dB
Resolution: 0.01 dB
Accuracy: ±0.2 dB
Impulse Noise
Filters
All settings valid
Threshold Level
Range: 20 dBrn to 100 dBrn
Resolution: 0.01 dB
Accuracy: ±2 dB from 20 dBrn to 40 dBrn with 15 kHz filter and no filter settings
±1 dB elsewhere
Impulse Counting
Max rate: 10 impulses per second (dead time is 100 ms)
Max Value: > 1,000,000
Conditions: After test is started, count impulses continuously until holding tone is detected. After holding
tone is detected, only count impulses when the holding is present.
To Next Page
Loading...