ATS-5X User Manual Page 5 of 44
Enter
Backspace
Escape
Figure 2 – Keyboard Icon
2.3.2 Mouse
When a valid USB mouse is plugged into the USB port, a mouse icon will be displayed in the title bar to the right of the
battery (see Figure 3) and a cursor will be displayed on the screen. As with the keyboard, the mouse must be an HID
type device to be considered valid. The cursor can be moved by the mouse and pressing and releasing the left mouse
button will act the same as pressing and releasing the touchscreen at the point where the cursor is displayed on the
screen. If a selection list with scroll controls is active, rotating the mouse scroll wheel will scroll the list. Any other
mouse button is not a valid input.
Figure 3 – Mouse Icon
2.3.3 Combination Keyboard and Mouse
Some USB devices allow both a USB mouse and keyboard on the same connection point, such as wireless mice and
keyboards. These devices are considered valid as long as they are HID type.
2.3.4 Drive
When a valid USB drive is plugged into the USB port, a disk icon will be displayed in the title bar to the right of the
battery (see Figure 4). The USB drive must be a class of USB device known as a mass storage device and must be
formatted with a FAT32, FAT16 or FAT12 file system in order to be considered a valid drive. If a software update file is
on the drive, a message will be displayed asking if the ATS-5X software should be updated with the file.
Figure 4 – USB Drive Icon
To Next Page
Loading...